TÉLÉCHARGER PAINTERLY PACK 1.4.2

For validation and indexing purposes, the mainLang attribute must be supplied: In the simplest case, only the extent attribute may be supplied: At times sentences occurs: Si plus d’un URI est fourni, cela implique que le nom identifie plusieurs entités distinctes. This description may of course be expanded to include any of the TEI elements generally available within a p element, such as title , bibl , or list. Il y a eu une rencontre entre mes « photos à grain » et leur procédé dit « au charbon ».

Nom: painterly pack 1.4.2
Format: Fichier D’archive
Système d’exploitation: Windows, Mac, Android, iOS
Licence: Usage Personnel Seulement
Taille: 13.80 MBytes

Il peut être lourd à porter, s’insinuant dans votre esprit comme une tumeur. The following elements are deleted: Module tei Utilisé par event listBibl location org place population relatedItem sourceDesc taxonomy trait model. Module header Utilisé par profileDesc. Intelligence Artificielle et Big Data: Name Les valeurs autorisées sont:

This Reference Guide defines an XML format for the structure of the data which all ENRICH partners will contribute to the Manuscriptorium, either directly or indirectly by means of a harvester or transformation process.

The format is formally expressed by a schema which is generated from the XML source of this guide. The guide itself is a conformant subset of Release 1. Within Manuscriptorium, only the first two are required.

However, the schema documented here also provides for the third, in the interest of completeness and for the assistance of ENRICH partners wishing to provide richer access facilities to their holdings. The remainder of this Guide describes each of these aspects in more detail, using material derived from the P5 release of the TEI Guidelines. Other header components, if present, will be ignored by Manuscriptorium; they will be retained for storage in the system and returned on request, but their content is not processed for any purpose, and they may not be visible for searching purposes.

Télécharger Foto artis yang tercantik di dunia

The value for xml: It should however be prefixed by an identifier for the partner concerned, so as to avoid possible identifier collisions. If no value is supplied, the assumption is that the language of the description is English. The first of these components, msIdentifieris mandatory; it is described in more detail in 1. It is followed by either one or more paragraphs, marked up as a series of p elements, or one or more of the specialized elements msContents 1.

These elements are all optional, but if used they must appear in the order given here. Finally, in the case of a composite manuscript, a full description may also contain one or more msPart elements 1. The dimensions element will normally occur within the element describing the particular feature or aspect of a manuscript whose dimensions are being given; thus the size of the leaves would be specified within the support or extent element part of the physDesc element discussed in 1.

The type attribute on the dimensions element is used to specify more exactly the item being measured.

Autocad 2010 activation crack télécharger

Attributes minmaxand scope are used only when the measurement applies to several items, for example the size of many or all the leaves in a manuscript; attributes atLeast and atMost are used when the measurement applies to a single item, for example the size of a specific codex, but has had to be estimated.

The units in which dimensions are measured should always be specified using the unit attribute, which will normally be taken from a closed set of values appropriate to the project, using standard units of measurement wherever possible. If the only data available for the measurement uses some other unit, or it is preferred to normalize it in some other way, then it may be supplied as a string value using the extent attribute.

The content of these elements, if present, simply copies the way that the measurement is presented in some source text; it may be omitted.

The locus element is used to reference a single location within a manuscript, typically to specify the location paxk by the element within which it appears.

If for example it is used as the first component of an msItem element, or of any of the more specific elements appearing within one see further section 1.

Alternatively, the key attribute may be used to supply painterlj identifying code for the person referenced by the name independently of both the existence of a person element and the use of the standard URI reference mechanism.

Although such practices clearly reduce the interchangeability of the resulting encoded texts, they may be judged more convenient or practical in certain situations. All the person elements referenced by a particular document set should be collected together within a listPerson element, located in the TEI Header. This functions as a kind of prosopography for all the people referenced by the set of manuscripts being described, in much the same way as a listBibl element in the back matter may be used to hold bibliographic information for all the works referenced.

Similar mechanisms are used to maintain and paiterly canonical lists of places or organizations. A manuscript’s actual physical location may occasionally be different from its place of ownership; at Cambridge University, for example, manuscripts owned by various colleges are kept in the central University Library.

  TÉLÉCHARGER CAP B2I POUR MAC GRATUIT

Normally, it is the ownership of the manuscript which should be specified in the manuscript identifier, while additional or more precise information on the physical location of the manuscript can be given within the adminInfo element, discussed in section 1.

At least one of the elements listed above must be given within the msIdentifier and they must, if present, appear in the order given. Like namethese elements are all also members of the attribute class att. As mentioned above, the paiterly possible description 14.2 one that contains only the element msIdentifier ; good practice in all but exceptional circumstances requires the presence within it of the three sub-elements settlementrepositoryand idnosince they provide what is, by common consent, the minimum amount of information necessary to identify a manuscript.

Phrase-level elements, such as titlenamedateor the specialized pxinterly origPlace and origDatecan also be used within a head element, but it should be remembered that the head element is intended principally to contain a heading. More structured information concerning the contents, physical form, or history of the manuscript should be given within the specialized elements .14.2 below, msContentsphysDeschistoryetc.

However, in simple cases, the p element may also be packk to supply an unstructured collection of such information, as in the example given above 1 Manuscript Description Metadata. Each discrete item in a manuscript or manuscript part can be described within a distinct msItem and may be classified using the class attribute. In addition, an msItem may contain nested msItem elements.

Untagged running text is not permitted directly within an msItemunless it is given within a p element, in which case none of the other component elements listed above is permitted.

painterly pack 1.4.2

When used within a manuscript description, the title element should be used to supply a regularized form of the item’s title, as distinct from any rubric quoted from the manuscript.

If the item concerned has a standardized distinctive title, e. Roman de la Rosethen this should be the form given as content of the title element, with the value of the type attribute given as uniform. Similarly, if used within a manuscript description, the author element should always contain the normalized form of an author’s name, irrespective of how or whether this form of the name is cited in the manuscript.

If it is desired to retain the form of the author’s name as given in the manuscript, pac should be given in the docAuthor element, or as a distinct name element, within the text at the point where it occurs. Note that the key or ref attributes can be used, on titles and on author names paack on names padk general, to link the name to a more detailed description of the person or work concerned see further 1. The form and scope of language identifiers recommended by these Guidelines is based on the IANA standard described at http: Where additional detail is needed correctly to describe a language, or to discuss its deployment in a given text, this should be done using the langUsage element painteely the TEI Header, within which individual language elements document the languages used: Most manuscript descriptions touch on several of these categories of information though few include them all, and not all distinguish them as clearly as we propose here.

In particular, it is often the case that an existing description will include within a single paragraph, or even sentence, information for which we propose distinct elements.

In this case, if rewriting is not an option, the existing prose must be marked up simply as a lainterly of p elements, directly within the physDesc element. The physDesc element may thus be used in either of two ;ack ways. It may contain a series of paragraphs paintwrly topics listed above and similar ones.

Topic Liste des pack de texture pour la 1.4.2 – Page 2

Alternatively, it may act as paniterly container for any choice of the more specialized elements described in the remainder of this section, each of which itself contains a series of paragraphs, and may also have more specific attributes.

If the two ways are combined in a single description, care should be taken to avoid duplication and all paragraphs of generic description must precede the first of the more specialised elements. Each of these elements contains paragraphs relating to the topic concerned. Within these paragraphs, phrase-level elements in particular those discussed above at 1.

This example combines information which might alternatively be more precisely tagged using the more specific elements described in the following subsections. Where the layout element is used, the layout will often be sufficiently regular for the attributes on this element to convey all that is necessary; more usually however a more detailed treatment will be required.

The attributes are provided as a convenient shorthand for commonly occurring cases, and should not be used except where the layout is regular. The value NA not-applicable should be used for cases where the layout is either very irregular, painetrly where it cannot be characterized simply in terms of lines and columns, for example, where blocks of commentary and text are arranged in a regular but complex pattern on each page.

Note the use of the term element to paintwrly specific technical terms within the context of pwinterly handDesc element. As the above example shows, the attributes script and scope are both required on handNote. The locus element, discussed in section 1. In addition, when a full or partial transcription of a manuscript is available in addition to the manuscript description, the handShift element 1.4.2 in http: It can be difficult to draw a clear distinction between aspects of a manuscript which are purely physical and those which form part of its intellectual content.

  TÉLÉCHARGER 4KEUS MOULA GRATUITEMENT

This is particularly true of illuminations and other paiterly of decoration in a manuscript. We propose the following elements for the purpose of delimiting discussion of apck aspects within a manuscript description, and for convenience locate them all within the physical description, despite the fact that the apinterly features of a manuscript will in many cases also be seen as constitutiing part of its intellectual content.

painterly pack 1.4.2

Information about the origins of the manuscript, its place and date of writing, should be given as one or more 1.4. contained by a single origin element; following this, any available information on distinct stages in the history of the manuscript before its acquisition by its current holding institution should be included as paibterly within one or more provenance elements. Finally, any information specific to the means by which the manuscript was acquired by its present owners should be given as paragraphs within the acquisition element.

The surrogates element should not be used to describe digital images of the manuscript since the facsimile element described in 2 Metadata about digital facsimiles is provided for this purpose. None of the constituent elements of additional is required. If any is supplied, it may painterlu once only; furthermore, the order in which elements are supplied should be as specified above. The status attribute of availability must take one of the following values: The change element within the revisionDesc element of the TEI Header should be used to document the revision history lainterly the record.

It paintfrly not be given within the recordHist element. For ENRICH purposes, information about digital images of the manuscript being described should be provided within the facsimile element discussed in section 2 Metadata about digital facsimiles below rather than within the surrogates element. The facsimile element is used to describe the digital images of the manuscript being made available to the ENRICH project. It contains, as a minimum, one surface element for each distinct page image, which in turn specifies one or more graphic element.

These elements are used pacm described in the TEI Guidelines, section This example defines only two pages.

painterly pack 1.4.2

There are three images associated with the first page, which is represented by the surface element with unique identifier Painferlyand two with the second, which has no identifier.

Each image is represented by means of a TEI graphic element. As well as acting as a container for the various images associated with a page, the surface element defines an abstract co-ordinate system which may be used when defining additional zones of interest on the page. In this example, the location of an initial letter on the page is defined, since we have a graphic representing 1.42 detail.

The zone within which the initial letter falls is in the box defined by the co-ordinates 20,20,70,70 within a grid defined by the co-ordinates 0,0, Thus, if apinterly surface depicted actually measured by mm, the initial letter would occupy a 50 X 50 mm square, with its upper left corner located 20 mm from the left and 20 mm from the top edges of the surface.

Note however that the numbers used to express co-ordinates are not measurements in any specific units and should not be used to determine the actual image size, since these may in any case vary greatly: The mimeType attribute is used to indicate the format of the graphic file itself, and may be any valid MIME type, as defined by the IANA, for example jpegpngbmptiff etc.

The decls attribute is used to indicate an external URI from which further metadata applicable to this image may be found. In this case we are assuming that there is a definition which can be used to indicate characteristics of a thumbnail image at the address indicated.

Note that this must be given in full, since it would otherwise be interpreted as an address relative paimterly the value of the xml: We include in the schema the four basic key TEI modules headercoreteiand textstructure.

We also include five specialized modules: All the elements painterlly attributes defined by these modules are included in the ENRICH schema, with the painherly modifications. Firstly, several unwanted elements are paintetly. Secondly, some optional attributes have been paintterly compulsory, and their range of possible values are constrained.

Finally, the content model for a small number of elements has been simplified to remove unwanted alternatives. The following elements are deleted: On the altIdentifier element, the type attribute is compulsory, and must take one of the following values: On the availability element, the status attribute is compulsory, 1.4.2 must take one of the following values: